|
New
Heavy Duty 65 Amp
Pulse Width Modulator
(PWM) With Remote Power On
Click for larger image
This
is our new 65 amp heavy duty PWM..
A PWM (Pulse Width Modulator)
is used to control the amount of HHO that a hydrogen
booster produces.
A
Pulse Width Modulator
can make any booster produce 2-3 times more monotomic
hydrogen than just using direct current alone, Also
using a PWM will make most HHO cells run cooler and
last much longer than just using DC current alone.
Need a great PWM? This is it...
Small but very powerful and will work for most all
HHO applications up to 5 LPM
This PWM comes with very large mosfet transistors.......
These Mosfets cost 10-20 times more than a cheap transistor
but we wanted a part that would last for years and
be easy to service for our customers.
Shipping weight of 1 Mosfet - 28 grams! Shipping
weight of the mosfet used on the 30 amp PWM? 4 grams.
Our
heavy duty PWM will handle almost any HHO cell and
is rated for over 1000 watts.
The 65 amp PWM also comes with two 30 amp built-in
fuses that can easily be changed and replaced.
This
PWM also comes with a remote power on feature
which eliminates the need to use a relay when connecting
your cell. Simply connect the remote wire to a switched
power wire. This makes for a nice clean installation.
Specifications:
* Supply Voltage: 10-18 VDC (remote power wire)
* Output can pulse 12-30 VDC
* Output Current: 0 - 60 amperes continuous, 120 amps
peak!
* Duty ratio can be set from 0% to 100%
*
30mm ball bearing cooling fan
* Calibrated gradient pulse width dial 0-100%
*
2 large bolt-on connectors rated for 75+ amps
* 2 - 30 amp fuses
* Power switch with red LED
* Remote power on terminal (1 amp max current draw)
* All aluminum case (7x4.5x2.5)
* Shipping weight approx 3 lbs
* Assembled in USA By Hydrogen Boost Now.
* 1 year unlimited warranty
This
item is no longer stocked
To be replaced with
the new Digital 75 amp PWM With automatic current
control
|
